C0592
Brake Booster Motor B Phase U-V-W Current High
C0592 reports excessive current in the second motor or second winding system, B, of an electric brake booster. No manufacturer publishes it in this sense; the number appears only in GM's keyword list PIP5094 for 2014 and older vehicles, from an earlier numbering. Side B exists in redundant layouts such as the Hyundai Mobis dual-winding booster motor, where two power modules with six MOSFETs each drive one winding and the healthy module takes over the full current command once the other is diagnosed as failed. Overcurrent on such a stage is caught by MOSFET drain-source monitoring and shunt amplifiers, as offered by TI's DRV8343-Q1. GM's side A limits (above 20 A leakage, 38 A offset) show the order of magnitude. Expect assist on side A only or reduced.
Possible causes
- Shorted or leaking transistor in power module B medium
- Insulation fault in winding system B medium
- Measuring offset of the side B current sensing low
Symptoms
- Brake assist warning, possibly weaker or slower assist
- Brake or ABS warning lamp on
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0592
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.