OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0591

Brake Booster Motor A Phase U-V-W Current Low

C0591 is the low counterpart: the current value of booster motor A lies below what is plausible, in practice a negative reading when the motor is at rest. In GM's 2016/2019 hybrid booster a leakage reading under −20 A counts while a half bridge is idle; the 2023/2025 EBCM tables set it when the offset taken from the internal shunt falls below −38 A for 0.2 s. The XT4 module is stricter: any idle offset under 0 A with the motor not actuated, under −36.1 A in general, or a phase current under −200 A for 0.3 s. All are Type A with MIL. A negative value at standstill points less to the motor than to the measuring chain: amplifier offset, shunt solder joints or the module's analog input. Mitsubishi's Outlander PHEV reports it as C18E1-18 with MIL and switches off assist.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 91

Possible causes

  • Current sense amplifier or ADC offset drifted below zero high
  • Cracked solder joint or damaged shunt in the power stage medium
  • Unexpected reverse current through a faulty bridge transistor low

Symptoms

  • Loss of electric brake assist, hard pedal
  • Check engine and brake warning lamps after one drive
  • Regenerative braking switched off

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0591

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication