OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C058F

Regeneration Torque Performance

C058F covers the case where regenerative braking does not deliver the torque the brake system has planned with. In a blended brake the brake module asks the electric drive for generator torque, usually the smaller of the available capacity and the driver's demand, estimates what actually arrives and adds friction braking for the rest, as a GM/BMW/Daimler/Chrysler patent explains. Ford Otosan describes inferring the regenerative share from vehicle deceleration and switching to friction braking at once when regeneration is unavailable, for example with a full or hot battery. Ford notes that its ABS module may cap regenerative torque and that on plug-in hybrids lost regeneration shortens electric range. No manufacturer documents C058F publicly; expect reduced recuperation.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 8F

Possible causes

  • Electric drive or inverter delivering less generator torque than requested medium
  • Traction battery unable to absorb charge (full, hot or cold) medium
  • Torque arbitration or estimation software in the brake or hybrid module medium
  • Missing or delayed torque messages between brake and drive modules low

Symptoms

  • Regenerative braking reduced or disabled, friction brakes do more work
  • Uneven deceleration or changed pedal feel during light braking
  • Shorter electric range on plug-in hybrids and EVs
  • Brake or hybrid system warning message

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C058F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication