OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C058E

Brake Booster Motor B Position Sensor Circuit Range/Performance

C058E concerns a second rotor angle channel of the electric booster motor whose readings are electrically valid but not believable. In GM's 2019 integrated brake control unit this is MPS2, a SENT sensor checked against the faster SPI sensor MPS1 of the same motor: a gap above 2° plus a 3° speed allowance, opposite directions or a changed rest offset for 100 ms set it, Type A with MIL. GM's PIT5638 series for the 2019 Silverado and Sierra 1500 covers cases where the cluster showed Service Brake Assist and the pedal turned hard; the fix was new BSCM calibration, and the ECM adds P25A2. Stellantis names C058E for the eBooster of the 2022–25 Wagoneer and Grand Wagoneer; if it returns after the revised test, BSCM and booster are replaced as a pair.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 8E

Possible causes

  • Brake control module calibration causing false correlation faults (GM PIT5638) high
  • Second rotor position sensor in the booster drifting or failing medium
  • Fault inside the brake control module or eBooster unit (replaced together) medium
  • Poor contact in the booster sensor connector low

Symptoms

  • Service Brake Assist message in the instrument cluster
  • Hard brake pedal needing more effort, longer stopping distance
  • Check engine lamp via the brake module request (P25A2)

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C058E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication