OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C058A

Brake Booster Motor A Position Sensor Circuit Range/Performance

C058A covers a position signal of booster motor A that is electrically valid but not believable. GM uses it widely: its 2016 and 2019 hybrid tables flag a rotor angle changing faster than 73° per ms, the 2019 IBC unit an invalid Hall pattern (all three high or all low) and a frozen signal, the XT4 module a vector length outside 0.6889–1.2996, and the 2023/2025 tables angle jumps beyond 711.2 rad/s – each Type A with MIL. NXP likewise treats Hall patterns 000 and 111 as an interface fault. GM's PIC6614 lists C058A for the Cadillac Lyriq with a brake assist failure message; Stellantis names it alongside C0582 for the Jeep Wagoneer and asks for BSCM and eBooster to be replaced together.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 8A

Possible causes

  • Position sensor delivering implausible angles (Hall element or sine/cosine sensor degraded) high
  • Intermittent contact or interference on the sensor lines causing angle jumps medium
  • Booster unit internal fault or position data no longer matching the stored calibration medium

Symptoms

  • Brake assist failure message, abnormal pedal feel
  • Check engine and brake warning lamps (GM)
  • Fault may be hard to read out with a normal scan tool

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C058A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication