OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0588

Brake Booster Motor A Position Sensor Circuit Low

C0588 is set when the position signal of booster motor A sits below its valid band. GM documents it in its EBCM tables: the 2019 Cadillac XT4 unit trips when a raw sine or cosine value drops under 1,300 counts, or their sum under 3,876, for 10 ms; the 2023 and 2025 tables use a cosine value under 10 counts for 0.15 s, a sine line under 1.047 V or a vector length below 0.25. GM rates every variant Type A, lighting the MIL on the first trip. A low value points to a grounded signal line or missing sensor supply; Hitachi's resolver patent notes that a ground short pulls the output to 0 V. Infineon's TLE5009, a sine/cosine angle sensor intended for motor commutation, specifies a valid vector band for the same reason. Assist is cut or limited, and often the booster unit must be replaced.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 88

Possible causes

  • Sine or cosine line of the sensor shorted to ground high
  • Missing sensor supply, signals collapse toward zero medium
  • Sensor element or target magnet damaged, amplitude too small low

Symptoms

  • Check engine lamp together with brake/ABS warning (GM)
  • Electric assist switched off, high pedal effort

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0588

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication