C0587
Brake Booster Motor A Position Sensor Circuit/Open
C0587 concerns the rotor position sensor of booster motor A – a resolver, a sine/cosine magnetic sensor or a set of Hall elements that tells the controller where the rotor stands so it can commutate the windings. The code reports an open sensor circuit. No manufacturer documents it publicly: GM books position faults of this motor under C0588, C0589 and C058A, and C0587 appears in GM's older keyword list only from a different numbering. Hitachi's resolver patent shows how a break is caught: a bias placed on one winding terminal must reappear at the other, otherwise a pull-up drives the reading high. Bosch describes a fallback for a booster whose rotor sensor goes silent – the motor is run open-loop with capped speed and speed changes, so assist becomes weaker.
Possible causes
- Broken signal or supply wire of the position sensor high
- Pushed-back or corroded pin at the sensor or module connector medium
- Sensor element inside the booster failed, booster unit usually replaced medium
Symptoms
- Electric brake assist reduced or off, hard pedal
- Brake warning lamp and message
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0587
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.