OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C057F

Brake Booster Motor A Phase U-V-W Circuit/Open

C057F covers an interrupted drive path in the three-phase motor of an electric brake booster: a winding, a phase lead or a power transistor that no longer carries current. GM documents it in several brake modules, always as Type A with MIL after one trip. Its 2016 and 2019 hybrid tables switch single bridge transistors while the motor is not being driven and set the code within 5 ms if the phase W voltage does not respond. The 2023 and 2025 EBCM tables measure coil resistance and trip above 0.20358 Ω (or below 0.01258 Ω) for 0.12 s, or when the voltage vector is off by more than 1.5 V. In GM's 2019 IBC unit C057F also covers phases that fail to rise above 3.46 V or sit near battery level before start-up. The brakes keep working, only without electric assist.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 7F

Possible causes

  • Broken winding or failed internal phase connection in booster motor A medium
  • Bridge transistor in the brake module no longer switching (drive stage defect) high
  • Corroded or loose phase contact between control unit and motor, raising coil resistance medium

Symptoms

  • Hard brake pedal, noticeably more pedal force needed
  • Brake system, ABS/traction and check engine lamps on
  • Message about reduced brake assist

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C057F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication