OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C057E

Brake Booster Temperature Sensor A/B Correlation

With two temperature sensors in the booster the module can cross-check them: after a long rest both should be close to ambient, and under load they should move in a consistent pattern. C057E is set when sensors A and B disagree beyond a plausible margin. GM fits two such channels in its booster (A: P25C6/P25C7, B: C0579/C057A), but its public tables do not list C057E, and no other maker documents it either. The idea is known from related systems: Safran compares redundant temperature sensors in electric brake actuators and discards inconsistent ones, and Hitachi Astemo's electric booster carries separate motor and drive circuit sensors. As the module cannot tell which reading is wrong, it usually protects the motor by reducing assist.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 7E

Possible causes

  • One of the two thermistors drifted or lost thermal contact high
  • Added resistance in one sensor circuit, e.g. corroded contact medium
  • Real local overheating of motor or power stage, e.g. after jammed mechanics low

Symptoms

  • Brake system warning with service message
  • Temperatures A and B clearly apart on the scan tool after a cold start
  • Reduced brake assist

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C057E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication