C057D
Brake Booster Temperature Sensor Circuit B Intermittent/Erratic
C057D is meant for a temperature B signal that drops out or jumps for brief moments instead of failing for good – a loose connector pin, a cracked solder joint or a wire breaking under vibration are the classic reasons. No manufacturer publishes a threshold for it. GM's monitors for this channel require several consecutive out-of-range samples (two or five) before storing C0579 or C057A, which filters single spikes; a separate code for unsteady behaviour is not listed in GM's public tables. Thermistor suppliers name mechanical stress, moisture and solder damage as frequent sources of unstable readings. The fault tends to come and go with temperature or road shocks and may return after clearing; while the signal is unreliable the booster can limit assist.
Possible causes
- Loose or fretting pin in the booster connector high
- Cracked solder joint of the thermistor on the circuit board medium
- Moisture ingress causing leakage currents at the sensor medium
Symptoms
- Brake warning that appears and disappears
- Temperature B jumping on the scan tool
- Code returns some time after clearing
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C057D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.