OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C057C

Brake Booster Temperature Sensor B Circuit Range/Performance

C057C covers a temperature B value that is electrically valid but behaves implausibly – it stays frozen, climbs too slowly after hard use, or departs from what the module's thermal estimate predicts. No manufacturer documents this code publicly. In Hitachi Astemo's electric booster patent the measured motor and drive circuit temperatures decide when current and thus assist are limited and when they are restored, with an intermediate step if the pedal is still pressed; a wrong but believable value would therefore throttle assist too early or let the motor run too hot. Thermistor makers name moisture, cracking, solder stress and resistance drift as typical long-term failures. The module may restrict assist as a precaution.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 7C

Possible causes

  • Thermistor resistance drifted through age, moisture or heat cycling high
  • Sensor lost thermal contact with motor or power stage medium
  • Plausibility model in the booster software too strict low

Symptoms

  • Brake warning, often after long or repeated braking
  • Temperature B frozen or lagging behind temperature A
  • Assist reduced earlier than usual

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C057C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication