C057A
Brake Booster Temperature Sensor B Circuit High
C057A is the high counterpart: temperature channel B of the booster reads at its upper end, which GM interprets as the signal shorted to supply. GM's 2023 and 2025 EBCM tables set it above 3.14 V when five checks in a row fail within 0.6 s and rate it Type B, with MIL after two trips; the 2019 Cadillac XT4 version uses 3.34 V and is Type C without MIL. Channel A trips at 3.27 V under P25C7, so the two channels have slightly different limits. Whether a high voltage means hot or cold depends on where the thermistor sits in its divider, which is why the module treats a value at the rail as a wiring fault rather than a temperature. Without a usable reading the booster cannot protect its motor and may reduce assist.
Possible causes
- Temperature signal B shorted to the sensor supply or another voltage high
- Thermistor or its return line open, pulling the input to the rail medium
- Moisture or corrosion inside the booster electronics low
Symptoms
- Check engine light after two trips (GM 2023/2025) and brake warning
- Temperature B reading stuck at a limit
- Reduced brake assist during long downhill braking
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C057A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.