C0574
Brake Pressure Sensor C Circuit Range/Performance
Here the sensor C signal is electrically within limits but does not make sense. GM's 2016–2019 hybrid brake modules learn the zero point while the pedal is released and set C0574 if the offset exceeds ±1,500 kPa; to confirm a repair the car is driven at about 37 mph for 5 s without braking. A 2019 EBCM compares its two secondary circuit pressure signals with each other and with pedal travel (difference above 5 bar), checks each learned offset (above 10 bar) and catches erratic readings within 80 ms. The 2023 and 2025 tables allow an offset of 12 bar. All are Type A with MIL. A Lucas/ZF patent shows why several sensors are needed: only a comparison of three or more at a shared pressure tells which one has drifted.
Possible causes
- Pressure sensor zero point drifted with age or temperature high
- Residual pressure while learning, e.g. dragging pedal or sticking valve medium
- Poor sensor ground shifting the signal level medium
- Sensor values not relearned after replacing the brake module low
Symptoms
- Check engine light and ABS or stability lamp (GM)
- Uneven or changed braking feel when regeneration blends in
- Code returns after clearing once the car has been driven
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0574
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.