C056E
Brake Pedal Position Sensor Supply Voltage Circuit High
C056E is stored when the 5 V feed of the brake pedal position sensor rises above its limit. In Ford's 2015–2019 hybrid logic that means more than 5.13 V for 50 ms; the ABS module records C100F and the hybrid powertrain module C056E. An elevated reference usually comes from a short between the supply and a battery-voltage wire, from a missing sensor ground that lets the line float up, or from a failing regulator. Since Bosch-type pedal sensors deliver two redundant outputs referenced to the same supply, a high supply skews both and the plausibility check can no longer help. GM uses C056E in its own way, for instance in the 2017–2019 parking brake case on Acadia, Traverse, Enclave and XT5 (PIT5662A).
Possible causes
- Supply wire shorted to a battery-voltage circuit high
- Open sensor ground letting the reference float high medium
- Faulty 5 V regulator in the brake module low
Symptoms
- Brake system warning lamp
- Regenerative braking limited
- Pedal sensor plausibility codes may follow
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C056E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.