OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C056B

Brake Pressure Sensor A Intermittent/Erratic

C056B means the signal from brake pressure sensor A drops out or jumps for short moments instead of being steadily wrong. Ford's hybrid summaries (2015–2019) name two triggers: a checksum error in the digital data coming from the sensor for 70 ms, or a commanded control signal that does not show up at the sensor within 70 ms; the check runs only with a healthy sensor supply (no C056A). Ford's ABS module stores the same event as C0044. Saab's 2011 9-5 shows the consequence of an erratic pressure signal under its own code C0131: ABS, hill start assist, stability and traction control are disabled for the rest of the ignition cycle. Shaking the harness while watching live data helps find the loose contact.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 6B

Possible causes

  • Loose or corroded contact in the pressure sensor connector or harness high
  • Disturbed digital sensor line, e.g. damaged shielding or poor ground medium
  • Sensor electronics failing intermittently, often in the hydraulic unit medium
  • Brief dips in the 5 V sensor supply low

Symptoms

  • ABS and stability lamps that come and go
  • Stability control or hill start assist off until next start
  • Regenerative braking reduced on hybrids

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C056B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication