C0569
Brake Booster Solenoid Circuit Performance
C0569 covers booster solenoid faults that are neither a clear open nor a clean short: the circuit reacts, but not as the module expects. Ford's hybrids (2015–2019) run three checks during operation, each over 80 ms: more than 2 V over the low-side driver while the high side is off, less than 160 mA in the test pulse with the high side on, or under 3.0 V supply with the high side on. Pump motor faults C052B–C052E block this test. A partly corroded connector or a coil with drifting resistance is the usual cause. GM used C0569 for something else entirely – a system configuration error in the transfer case module (PIP5089A) – so check the brand before diagnosing.
Possible causes
- Corroded or loose terminals adding resistance in the solenoid circuit high
- Solenoid coil with out-of-range resistance medium
- Degraded driver stage in the ABS module low
Symptoms
- Intermittent brake system warning
- Brake assist occasionally unavailable
- Code returns after clearing
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0569
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.