C0568
Brake Booster Solenoid Circuit High
C0568 is the high-side counterpart of C0567: the solenoid circuit carries voltage when it should be dead. In Ford's 2015–2019 hybrid logic both drivers are commanded off and the solenoid supply line must stay near zero; more than 3.0 V for 80 ms points to a short to battery voltage or a driver that will not switch off, and the hybrid powertrain module reports C0568 (ABS code C0022). The risk is a solenoid energised without command, which would add boost the driver did not ask for, so the module blocks the function. An Aisin patent explains why that matters: energising the valve alone raises the booster output. Check for a short to a neighbouring powered wire before suspecting the module.
Possible causes
- Solenoid wire chafed against a powered circuit high
- High-side driver in the ABS module not switching off medium
- Contamination bridging pins in the solenoid connector low
Symptoms
- Brake system warning lamp
- Brake assist switched off
- Unusual pedal feel on hybrids
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0568
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.