C0565
ABS Control Module System Voltage High
C0565 is set when the ABS module measures a supply voltage above its permitted maximum; excess voltage can damage the valve and pump drivers, so the module stops regulating. Mitsubishi maps its C1056-17 to C0565 on the 2023 Outlander PHEV: 16 V or more on the ignition feed within 1 s, ASC, ABS, brake and parking brake lamps plus the MIL after two trips; ABS, EBD, ASC, brake assist and the electric parking brake are suspended. Ford's hybrids flag voltage above 16.9 V. Causes lie in the charging side – a faulty regulator or DC/DC converter, or jump-starting or charging with too high a voltage. The low-voltage counterpart is C0564.
Possible causes
- Faulty alternator regulator or DC/DC converter overcharging the 12 V system high
- Jump-start or battery charger set to an excessive voltage medium
- Poor ground making the module read voltage too high low
Symptoms
- ABS, stability, brake and parking brake warnings
- Check-engine lamp on some models
- Bulbs burning out or other modules reporting overvoltage
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0565
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.