OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0564

ABS Control Module System Voltage Low

The ABS module needs a stable 12 V supply to switch its valves and pump. C0564 means its measured system voltage has dropped below the permitted minimum. Ford's hybrids accept 9.0 to 16.9 V and log anything outside as C0564 (low) or C0565 (high), suspending pump motor checks meanwhile. Mitsubishi's Outlander PHEV detects 10 V or less within 1 s under C1056-16 – without SAE number or MIL – and suspends ABS, EBD, ASC, traction control, brake assist and the electric parking brake. Typical triggers are a tired battery, cranking dips or a poor feed or ground to the module. Unlike C055B, which concerns only the pump motor feed, C0564 affects the whole module.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 64

Possible causes

  • Weak or deeply discharged 12 V battery high
  • High resistance in the module fuse, feed wire or ground medium
  • Alternator or DC/DC converter not supplying enough voltage medium
  • Parasitic drain or aftermarket equipment pulling the battery down low

Symptoms

  • ABS, stability and brake warnings, often together with other modules' warnings
  • Electric parking brake or hill hold unavailable
  • Warnings disappear after recharging the battery

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C0564

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication