OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C055E

Brake Hydraulic Circuit A Leak

C055E reports a leak in hydraulic circuit A, the counterpart of C055D. Land Rover documents it on the Defender L663 from 2020 as C055E-7A, meaning lost fluid or a failed seal, with amber ABS and DSC lamps. By design the code survives a simple clear: after the repair the ignition is cycled until the car sleeps, switched on again, left 15 s without touching the pedal, then the pedal is held firmly for up to 120 s while the valves click through a self-check (SSM 74988). If lamps stay lit, the leak is still there. GM's 2025 EBCM tables list C055E for the second circuit with the same leakage limits as C055D and Type A MIL. Driving on is risky, because only one circuit may be braking.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 5E

Possible causes

  • Fluid escaping from a line, hose, union or caliper of circuit A high
  • Internal seal failure in master cylinder or hydraulic unit medium
  • Repair done but the required self-check was not completed, so the code stays medium
  • Air trapped after bleeding or component replacement low

Symptoms

  • Amber ABS and DSC/ESC lamps, possibly red brake warning
  • Longer pedal travel or spongy feel
  • Warning returns after clearing until the self-check passes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C055E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication