C055C
ABS Pump Motor Supply Voltage Circuit A Range/Performance
The return pump motor of the ABS/ESC hydraulic unit has its own power feed, usually a fused line from the battery switched through a relay or a transistor stage in the module. C055C means this feed is present but its voltage does not behave as expected while the motor is off or running – sagging under load, slow to rise or drifting – as opposed to the hard open or short codes C052F, C055A and C055B. No maker publishes a C055C threshold. Ford checks the same motor supply under C052B: below 6 V with the pump off or 7.3 V with it on for 1.8 s. Mitsubishi files a motor or motor-relay fault (C1051-1C, up to 12 s) without an SAE code. GM used C055C in older power steering modules for an unrelated fault. With the pump unusable, ABS and stability control switch off.
Possible causes
- Corroded or loose pump motor fuse, feed terminal or ground at the hydraulic unit high
- Weak battery or charging fault letting the supply collapse under motor load medium
- Worn or sticking pump motor drawing excessive current medium
- Faulty motor relay or driver stage inside the ABS module low
Symptoms
- ABS and stability control warning lamps on
- No pump buzz during the start-up self-test
- Normal braking remains, but without ABS regulation
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C055C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.