C055B
ABS Pump Motor Supply Voltage Circuit A Low
Supply voltage A of the pump motor is below its lower limit. Under load the motor pulls the feed down, so a weak 12 V battery, a corroded terminal, a high-resistance fusible link or a poor ground can all set it, and the relay may chatter. No maker publishes C055B. On the 2023 Outlander PHEV Mitsubishi specifies 10–16 V at the motor feed and flags an ignition supply of 10 V or less at its brake unit within 1 s under C1056-16, a code without generic equivalent. A patent originally filed by AlliedSignal and now owned by Bosch flags its own fault if the motor sits under roughly 7 V at shut-off, and a Hitachi patent for electric brake actuators limits motor current once the vehicle supply falls under a set level. Charge and test the battery before replacing parts.
Possible causes
- Weak or discharged 12 V battery high
- Corroded terminal or high-resistance fusible link in the motor feed medium
- Poor ground connection of the ABS unit medium
Symptoms
- ABS and ESC warning lamps on, often after cold starts
- Pump runs sluggishly or ABS functions drop out
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C055B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.