C055A
ABS Pump Motor Supply Voltage Circuit A High
Supply voltage A of the ABS pump motor is above its upper limit. The motor draws heavy current, so overvoltage stresses motor, relay or semiconductor switch; typical causes are a faulty alternator regulator, a jump-start or charger at too high a voltage, or a measuring fault in the module. No maker documents C055A publicly. Mitsubishi shows comparable limits on the 2023 Outlander PHEV: the motor feed is specified at 10–16 V, and the brake unit stores C1056-17 (generic C0565, ABS module system voltage high) once its ignition supply reaches at least 16 V, with a detection delay of at most 1 s, suspending ABS, ASC and related functions. Circuit B has its own codes (C05A5 ff.). Measure the charging voltage first.
Possible causes
- Alternator regulator or DC/DC converter delivering too high a voltage high
- Jump-start or battery charger with excessive voltage medium
- Voltage measurement fault in the ABS control unit low
Symptoms
- ABS and ESC warning lamps on
- Other overvoltage warnings or flickering lights at the same time
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C055A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.