OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0559

Power Steering Control Module Range/Performance – Rear

C0559 covers the rear steering controller, the electronics of active rear-wheel steering, when it fails its own performance or plausibility checks. Systems such as ZF's AKC turn the rear wheels by up to 12° opposite to the front ones at low speed and in the same direction from about 60 km/h. No maker documents C0559 publicly, but the faults are known under other codes: Bentley logs P060700 (control module performance) in the rear axle steering unit J1019 and checks damage, ground point 710, replaces the rack and realigns; Audi updates J1019 software for C12A329 and asks for an alignment; on the 2017 Q7 a sensor signal discrepancy lit the steering lamp. A Mazda patent compares three position detectors, uses the agreeing pair and returns the wheels to centre. The car then drives like one without rear steering.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 59

Possible causes

  • Rear steering control module software fault (update available) high
  • Disagreeing position or angle signals inside the rear steering actuator medium
  • Poor ground or supply of the rear steering unit medium
  • Damaged, contaminated or worn rear steering actuator low

Symptoms

  • Steering or rear steering warning in the instrument cluster
  • Larger turning circle, rear wheels held straight
  • Driver assistance functions limited on some models

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0559

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication