C0554
Longitudinal Acceleration Sensor Circuit High
C0554 is the upper counterpart of C0553: the fore-aft acceleration voltage stays above the highest value that a real sensor reading may take. With a mid-scale zero point, as in a Hyundai/Kia G-sensor patent (2.5 V on a 5 V supply), a value pinned near the reference voltage would mean an absurd, constant acceleration, so the module treats it as a circuit fault. Typical reasons are a signal wire touching a supply line, moisture bridging pins in the plug, or an internal sensor defect; Bosch also names supply fluctuations among the disturbances its check has to catch. No public manufacturer text covers C0554. The module drops the signal, suspends stability and related assist functions and lights the ESC/ABS lamp, while normal braking stays available. C0551 is an open line, C0552 a plausible-looking but wrong value.
Possible causes
- Signal wire shorted to a supply voltage high
- Moisture or corrosion bridging pins in the sensor connector medium
- Sensor output stage failed at the upper end low
Symptoms
- ESC and ABS warning lamps on
- Traction and stability assistance switched off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0554
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.