OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0553

Longitudinal Acceleration Sensor Circuit Low

C0553 is stored when the longitudinal acceleration signal sits below the lowest voltage the module accepts. Analog acceleration sensors idle at mid-scale; a Hyundai/Kia patent gives 2.5 V as the zero point of a G-sensor on a 5 V reference, so a level dragged toward 0 V cannot come from real braking but points to the wiring: signal shorted to ground, missing sensor supply, or a sensor whose output stage has failed. The same patent has the controller check the sensor at ignition-on and switch to a fallback mode with a warning on failure. No manufacturer publishes C0553 itself. As with the open circuit, stability and related assist functions drop out and the ESC/ABS lamp lights, base brakes keep working. C0554 is the opposite case, C0551 an open line.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 53

Possible causes

  • Signal wire chafed through and shorted to ground high
  • Sensor reference supply missing or collapsed medium
  • Sensor output stage failed at the lower end low

Symptoms

  • ESC and ABS warning lamps on from start-up
  • Stability control and hill-hold unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0553

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication