OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0552

Longitudinal Acceleration Sensor Range/Performance

Here the fore-aft acceleration signal arrives but does not match how the car is actually moving. Mitsubishi's 2023 Outlander PHEV brake controller reports its built-in decel G sensor fault C1071-64 as C0552; the check needs a healthy supply and takes up to 2 s, and a second faulty drive turns on the ASC and ABS warnings as well as the check-engine lamp. ASC, traction control, brake LSD, brake assist, brake force distribution and hill start assist are suspended. Mitsubishi lists altered vehicle attitude (different tyre sizes front and rear, overload) and a wrongly angled ABS unit among the causes. Patents describe the test: Sumitomo (now Advics) relates the sensor value to the derivative of the fastest wheel speed and, after repeated misfits, has ABS use wheel data only; Bosch adds offset and range checks on straight roads.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 52

Possible causes

  • Changed vehicle attitude, e.g. different tyre sizes front and rear or overload high
  • ABS/ESC unit or sensor mounted at the wrong angle or loose medium
  • Sensor offset drifted or internal sensor defect medium
  • Faulty wheel speed data used as comparison value low

Symptoms

  • ESC/ASC and ABS warning lamps on, MIL possible on some models
  • Stability control, traction control and hill start assist switched off
  • Fault returns after load or tyre changes

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0552

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication