OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0551

Longitudinal Acceleration Sensor Circuit/Open

C0551 reports an electrical break in the longitudinal acceleration sensor circuit: the brake or stability module no longer gets a usable fore-aft signal, usually because the signal or supply wire is open or a plug has lost contact. Earlier layouts mounted a separate g-sensor close to the centre of gravity and cabled it to the ABS unit; a Kelsey-Hayes patent (now ZF) describes a capacitive element whose analog voltage rises with acceleration and moves it onto the ABS circuit board to drop wiring and connectors. No manufacturer explains C0551 in a public document. Without the input, four-wheel-drive ABS loses its wheel-independent speed reference and stability functions are normally switched off with ABS/ESC lamps lit, while base braking remains. C0553 and C0554 cover a low or high voltage, C0552 an implausible value.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 51

Possible causes

  • Broken signal or supply wire between sensor and brake module high
  • Corroded, loose or pushed-back terminal at the sensor plug medium
  • Internal open in the sensor or, on integrated designs, in the ABS/ESC unit low

Symptoms

  • ABS and/or ESC warning lamp on
  • Stability, traction or hill-start assistance unavailable
  • ABS on four-wheel-drive vehicles regulates less precisely

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0551

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication