C0550
Vacuum Sensor B Circuit High
Vacuum sensor B puts out more voltage than its design permits. HELLA caps the output of its booster sensor at 4.8 V, with 4.5 V already standing for −1000 hPa, so anything above is a wiring or sensor fault: signal touching the supply or battery voltage, a broken ground return or a failed sensor. Because a high voltage simulates strong vacuum, the control unit must not rely on it for switching the electric vacuum pump; Bosch describes that pump control as the core job of the measurement. Mitsubishi's brake unit catches vacuum sensor shorts within a second and suspends brake assist. No maker documents C0550 with this meaning; one GM bulletin cites C0550 at a rear differential clutch module, a GM-specific use. C054F is the low counterpart, C054C the same fault on A.
Possible causes
- Signal of sensor B shorted to supply or battery voltage high
- Ground return of sensor B broken medium
- Sensor B stuck at high output low
Symptoms
- Brake assist or brake system warning on
- Firm pedal possible if the pump is not switched on when needed
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C0550
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.