OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C054D

Vacuum Sensor B Circuit/Open

Circuit fault on a second vacuum sensor, labelled B, typically an open in its signal, ground or feed. Some systems carry more than one vacuum measurement, for example a booster sensor next to one on the pump or supply line, but which sensor is B is not published by any maker, and no manufacturer documents C054D. The monitoring follows the same pattern as for sensor A: Mitsubishi's brake unit in the 2023 Outlander PHEV recognises an open, a short or a noisy vacuum sensor signal within a second (its own code C1073) and drops brake assist. HELLA's sensor wiring is simple – one pin each for output, ground and supply – so inspection starts at the connector. C0549 is the same fault on sensor A; C054E to C0550 are plausibility, low and high faults of B.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 4D

Possible causes

  • Connector of sensor B unplugged, loose or corroded high
  • Interrupted wire in the sensor harness medium
  • Sensor B open internally low

Symptoms

  • Brake system or brake assist warning
  • Vacuum pump control in fallback, pump running longer

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C054D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication