C054A
Vacuum Sensor A Range/Performance
Vacuum sensor A delivers an in-range voltage that does not agree with what the booster should hold. Patents show the logic: GM compares booster vacuum with engine vacuum from the MAP sensor while the throttle is closed, because the two should track each other without braking, and flags a sensor biased high or low when the difference persists too long; Ford relies on the check valve and treats a booster pressure clearly above manifold pressure as sensor degradation. Mitsubishi's 2023 Outlander PHEV brake unit has a related check that faults a booster vacuum of about 0 kPa while the engine runs (C106D-01), though that may also mean a real leak. No maker documents C054A publicly; A-B assignment varies. Electrical faults are C0549, C054B and C054C.
Possible causes
- Vacuum sensor drifted or contaminated (oil, moisture) high
- Real leak in hose, check valve or booster making the reading look wrong medium
- Faulty comparison value, such as manifold pressure low
Symptoms
- Brake assist warning or reduced assist feel
- Electric vacuum pump running more often than normal
- Stop-start or cylinder deactivation inhibited
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C054A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.