OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0549

Vacuum Sensor A Circuit/Open

General circuit fault of vacuum sensor A, usually a broken or disconnected signal, ground or feed line. The sensor measures the vacuum in the brake booster; Bosch notes that its value lets the system run the electric vacuum pump, permits engine stop-start and supports ESP functions. Mitsubishi shows how a brake unit watches it on the 2023 Outlander PHEV: with power on and normal supply, an open or a short in the brake vacuum sensor circuit, or signal noise, is detected within a second and stored as C1073, after which brake assist is suspended; Mitsubishi does not map that fault to an SAE code. Which physical sensor is called A is manufacturer-specific, and no maker documents C0549 publicly. C054A to C054C cover plausibility, low and high signal.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 49

Possible causes

  • Sensor plug loose or not latched after work in the engine bay high
  • Broken signal, ground or supply wire medium
  • Internal open in the vacuum sensor low

Symptoms

  • Brake assist warning or ABS lamp on
  • Stop-start no longer switching off the engine

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C0549

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication