OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0546

VIN Not Programmed or Incompatible

Generic variant without a named module: a chassis control unit reports that its stored vehicle identification number is blank or does not match the car. Which unit sets it is left to the maker, so the scan tool entry shows the module concerned. The principle is documented in GM patents: each unit keeps the VIN in memory, possibly in write-once storage set at the factory; a replaced or manipulated module reveals itself because its number differs from the others, and a fresh module can adopt the vehicle VIN and its configuration on start-up. In practice the code follows a module swap without the required programming. No maker documents C0546 publicly. C0545 is the same fault tied to the brake system module; P0630 and P0631 cover engine and transmission control.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 46

Possible causes

  • Replacement chassis module not programmed with the vehicle VIN high
  • Second-hand module carrying a foreign VIN medium
  • Software level not matching the vehicle configuration low

Symptoms

  • Warning lamp of the affected chassis system on
  • Function of the replaced module missing or limited

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0546

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication