OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0545

VIN Not Programmed or Incompatible - BSCM

The brake system control module (BSCM) holds no vehicle identification number, or one that does not belong to the car it is fitted to. Modules store the VIN in non-volatile memory; GM patents describe a replacement module comparing its own stored VIN with the one held by another control unit and running a configuration routine when they differ, and point out that a swapped or tampered module shows up as a VIN discrepancy. The code therefore appears mainly after a used or new brake module has been installed without the programming and setup the maker requires; Saab 9-5 (2010) service data, for instance, demands programming plus configuration and setup after an EBCM replacement. No maker documents C0545 publicly with this meaning; GM uses the number for a power steering fault.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 45

Possible causes

  • New brake module installed without VIN programming high
  • Used module from another vehicle still carrying its old VIN medium
  • Programming session interrupted, for example by low battery voltage low

Symptoms

  • ABS or ESC warning lamp on after a module replacement
  • Brake-related functions limited or disabled

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0545

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication