C0543
Brake Pressure Sensor B Circuit High
Here the signal of brake pressure sensor B sits above the top of its permitted range, which points to a signal wire touching the 5-V reference or battery voltage, an open sensor ground, or a sensor that has failed high. Stellantis is the one maker naming the code publicly: bulletins covering the stop-start Cherokee of model year 2019 with the 3.2-litre V6 list Brake Pressure Sensor 2 Circuit High next to the matching low fault, logged in the engine control module and cleared up by new PCM software (18-023-19, 18-077-22). For the electrical threshold, a Saab 9-5 brake module flags readings above 4.75 V held for 0.1 s. Unlike C0541 this is a pure voltage fault; C0542 is the low counterpart and C0544 the open circuit.
Possible causes
- Signal wire shorted to reference or battery voltage high
- Sensor ground open or high resistance medium
- Engine control software fault (Jeep Cherokee 2019 bulletins) medium
- Sensor failed with permanently high output low
Symptoms
- Check-engine lamp on
- Stop-start or brake-related assistance not working
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0543
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.