OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0541

Brake Pressure Sensor B Range/Performance

Brake pressure sensor B delivers a valid voltage, yet the value is implausible. Which sensor carries the letter B varies by maker. Bentley documents the code for the Continental GT/GTC (2018–2022) and Flying Spur (2020–2022): C054100 in the ESC unit J104 is labelled as a fault of the rear-left pressure sensor, adaptive cruise control becomes unavailable, and the repair is a new J104 because the sensor is built into it. Typical tests behind such a fault are described by Saab, whose 9-5 brake module rejects a pressure reading that does not match deceleration or the brake switch, and by a Honda patent that declares the sensor failed when pedal stroke grows but pressure does not. A Bosch patent adds an offset that has drifted too far. C0542 to C0544 are the electrical faults.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 41

Possible causes

  • Pressure sensor inside the ESC hydraulic unit drifting or sluggish high
  • Zero-point calibration not done after module or valve block replacement medium
  • Brake light switch or pedal sensor giving a contradictory reference low

Symptoms

  • Adaptive cruise control unavailable
  • ESC or ABS warning in the cluster
  • Assistance functions such as brake assist reduced

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0541

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication