OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C053D

Brake Pressure Sensor A Range/Performance

The brake pressure sensor A signal is electrically present, but its value does not fit the braking situation. GM stores C053D in the brake system control module, calling it a circuit performance fault: on 2019 Silverado/Sierra 1500 drivers got a hard pedal plus the Service Brake Assist warning (PIT5638), and bulletin 20-NA-073 lists it among faults that drop the brake-by-wire system into its mechanical Push-Thru mode; the fix is BSCM software. Stellantis logs it as Brake Pressure Sensor 1 Performance in the PCM of the 2023 Grand Cherokee, where the PCM compares the sensor with the pedal position sensor inside the BSCM; remedy is a PCM flash or an ABS initialization. Mitsubishi maps C106C-02 to it (Outlander PHEV 2023, ASC lamp plus MIL after two trips).

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 3D

Possible causes

  • Brake or engine control software with an over-sensitive plausibility check (several bulletins) high
  • Pressure and pedal sensors not initialized after module or hydraulic unit replacement medium
  • Air in the brake lines distorting the pressure build-up medium
  • Stop-light switch or pedal sensor delivering a mismatching reference low
  • Drifting pressure sensor in the hydraulic unit low

Symptoms

  • Brake assist or stability control warning shown
  • Brake pedal hard or travelling further than usual
  • Check-engine lamp on some models

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C053D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication