C053C
Wheel Speed Sensor Generic Range/Performance
A wheel speed signal is implausible, but the fault is reported generically rather than for one named wheel. Mitsubishi uses C106A-64 as C053C on the 2023 Outlander PHEV and runs four detection paths, one per sensor, each with a delay of at most 1 s; listed causes include the sensor, its rotor and a wrong tire size, and the code needs two trips before ASC, ABS, brake, parking brake and check-engine lamps light. Active Hall sensors, as Bosch describes them, read a rotating encoder and send pulses whose frequency follows wheel speed down to about 0.1 km/h, so mismatched tires or a damaged encoder ring distort the comparison. Wheel-specific circuit faults use C0500 ff., wrong parts C0555–C0558.
Possible causes
- Mismatched tire sizes or a space-saver spare fitted high
- Damaged or dirty encoder ring (sensor rotor) medium
- Wheel speed sensor faulty or not seated correctly medium
Symptoms
- ABS, ESC and brake warning lamps on after two trips
- ABS, traction control and stability control switched off
- Speed-dependent assistance functions unavailable
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C053C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.