C0539
Motor Control B Supply Voltage Circuit/Open
Motor control B has lost its power supply, or the supply circuit is open. In many brake and chassis controllers the motor stage is fed by its own fused battery line while the logic runs from ignition, so the module can still communicate and store this code. A Hitachi patent for electric brake actuators monitors the vehicle supply line and, once it drops to a set level, switches to backup power and limits motor current; driver ICs like TI's DRV8873-Q1 enforce an undervoltage lockout on their motor supply. J2012 does not specify the motor behind B and no manufacturer was found that documents C0539 publicly. Check the fuse or fusible link, the supply wire, connector and ground; for channel A see C0534.
Possible causes
- Fuse or fusible link of the channel B feed open high
- Loose or corroded supply connector medium
- Weak 12 V battery pulling the motor supply below the limit low
Symptoms
- Warning lamp of the affected system on
- Motor B never runs although the module communicates
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0539
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.