C0537
Motor Control B Circuit High
Channel B of the motor control reads high, meaning a motor terminal is pulled toward battery voltage against the command. A pinched lead touching a live wire, moisture bridging pins in a shared connector, or a high-side switch stuck in the conducting state are the usual suspects. For the shut-down logic, the Bosch patent US5329238 distinguishes this case from a short to minus and can block drive in just one direction; TI's DRV8873-Q1 covers shorts to battery with its overcurrent monitoring, which can latch, retry or only report. C0537 appears in no public manufacturer document found, and J2012 leaves the motor unnamed. Expect the function to be off, possibly with a motor that briefly runs on; the A-side equivalent is C0532.
Possible causes
- Pinched motor B lead contacting a live wire high
- Moisture between pins of a shared connector medium
- High-side switch for channel B not opening low
Symptoms
- Warning lamp of the affected system on
- Motor B runs on briefly or the function is switched off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0537
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.