C052F
ABS Pump Motor Supply Voltage Circuit/Open
The pump motor has its own battery feed, separate from the logic supply, and this code reports that feed as missing or open. Mitsubishi's 2023 Outlander PHEV manual shows the layout: motor and motor relay draw from a 60 A fusible link and must see 10–16 V at the unit connector, the valves from a separate 50 A link, the electronics from a 5 A fuse. Mitsubishi itself reports such a loss through its pump motor code and lists fuse, fusible link and 12 V battery as causes, not via C052F. An AlliedSignal patent (now Bosch) logs a separate fault when the motor voltage at switch-off is below about 7 V. Because the electronics stay powered, the module still communicates and lights the ABS lamp while the pump is dead.
Possible causes
- Pump motor fuse or fusible link blown high
- Corroded or loose battery feed terminal at the ABS connector medium
- Open or high-resistance ground of the ABS unit medium
Symptoms
- ABS and ESC warning lamps on
- Pump motor never runs, ABS and stability control off
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C052F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.