C052C
ABS Pump Motor Control Circuit/Open
Open circuit in the ABS pump motor drive: the control unit finds no current path through motor or relay where one should exist. Mitsubishi lists C1051-13 as C052C on the 2023 Outlander PHEV within the same frame as C052B (normal supply, up to 12 s, ABS, ASC, brake and engine lamps after one trip, stability and regenerative braking functions off). Its confirmation drive runs at roughly 50 km/h for about two minutes, so a cleared code may only return on the road. A Bosch patent spots an interruption while the motor is not driven: two resistors bias both terminals to a middle level, and a broken loop drags one terminal down and the other up. Likely causes are a loose connector, burnt brushes or an open winding inside the hydraulic unit.
Possible causes
- Loose or corroded connector at the ABS unit high
- Worn brushes or open winding in the pump motor medium
- Motor relay contact not closing medium
Symptoms
- ABS and ESC warning lamps on
- ABS, traction and stability control switched off
- Code returns only after a short drive
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C052C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.