OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C052B

ABS Pump Motor Control Range/Performance

Range/performance fault of the ABS pump motor: the drive is commanded, but the motor or its relay does not behave as expected. On the 2023 Mitsubishi Outlander PHEV the brake unit maps C1051-04 (and C1051-49, added by bulletin TSB-23-35-002) to C052B; it is checked with normal supply voltage, set within 12 s; after a single trip the ASC, ABS and brake warnings plus the check-engine lamp come on. ESC, traction control, ABS, EBD, brake assist and regenerative braking are suspended. An AlliedSignal patent, now held by Bosch, shows one test: a healthy motor coasts after switch-off and its voltage decays slowly, so a decay faster than about 134 V/s marks a motor that did not turn. Usually motor or pump in the hydraulic unit are worn or seized; basic braking stays.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 2B

Possible causes

  • Pump motor worn (brushes) or pump seized in the hydraulic unit high
  • Motor relay or switching stage in the ABS unit faulty medium
  • Marginal supply or ground connection under motor load medium

Symptoms

  • ABS, ESC and brake warning lamps on
  • ABS and stability control unavailable, normal braking remains
  • No pump noise during the self-test after starting off

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C052B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication