OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C052A

Steering Angle Sensor Module Correlation

The steering angle sensor module reports wheel angle and turn rate to the stability control unit, which cross-checks that value against an independent estimate. Correlation means the reading and the estimate disagree for longer than the calibrated window; the signal itself is present. A Bosch patent derives a model yaw rate from the angle and the left/right wheel-speed difference, and a Ford patent lets the ESC unit judge an angle supplied by electric power steering from yaw rate, wheel speeds and lateral acceleration, switching ESC off with a warning lamp if the check fails. No manufacturer documents this exact code publicly. Typical triggers are an offset after an alignment or steering repair and an internal module fault. Unlike C0528 or C0529, the sensor may look sane on its own.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 2A

Possible causes

  • Angle offset after wheel alignment or steering work without zero-point adjustment high
  • Internal fault in the steering angle sensor module medium
  • Faulty comparison signal (yaw rate, wheel speed or steering angle from power steering) low

Symptoms

  • ESC or traction control warning lamp on
  • Stability control switched off or intervening at the wrong moment
  • Steering wheel off-centre when driving straight

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C052A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication