OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0529

Steering Angle Sensor Module Missing Calibration

C0529 is set when the steering angle sensor module has no valid zero point. Stellantis documents it as C0529-00 on the 2023 Dodge Hornet and the 2023–2024 Alfa Romeo Tonale: if the wheel was turned without assist between key-off and key-on, the calibration was lost and the MIL came on, going out again after a lock-to-lock turn; an EPS software update fixes it (TSB 08-148-23, 08-163-23). For the 2022–2023 Ram ProMaster, an internal note asks for sensor initialisation by turning lock to lock with the engine running, or via wiTECH, after battery disconnection and before any steering gear replacement. Saab and Mitsubishi likewise require a straight-ahead calibration after alignment or sensor replacement.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 29

Possible causes

  • Calibration lost after battery disconnection or steering while switched off high
  • Initialisation skipped after steering gear, sensor or alignment work medium
  • EPS software losing the calibration (Stellantis 2023–2024) medium

Symptoms

  • Malfunction indicator lamp on (Stellantis)
  • ESC warning lamp on, stability control limited until calibrated
  • Lamp goes out after turning the wheel from lock to lock

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C0529

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication