OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0528

Steering Angle Sensor Module Range/Performance

C0528 means the module delivers an angle that is out of range or behaves implausibly while it still communicates. Audi documents it on the 2015–2018 A3 e-tron as C052800, steering angle sender with implausible signal, sometimes stored together with P060700 after ESC had been switched off (TSB 2060682/1); the ESC lamp lights. A Kelsey-Hayes patent shows how such checks work: an offset that moves more than 15° after re-zeroing counts as a shift fault, more than 10 s of cumulative dropouts or 1000 events as intermittent, and yaw control stays off until the signal is trusted again. Bosch builds plausibility tests between the measuring channels into its GMR sensor. Unlike C052A, the error lies in the sensor value itself.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 28

Possible causes

  • Steering angle sensor module delivering implausible values high
  • ABS/ESC module software issue (Audi A3 e-tron) medium
  • Offset after alignment or steering work without re-zeroing medium

Symptoms

  • ESC warning lamp on
  • Stability control unavailable or intervening at odd moments

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0528

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication