C0525
Multi-axis Acceleration Sensor Module B
General fault of module B, without stating whether range, calibration, signal stability or correlation is at fault. No manufacturer publishes C0525, and the location of module B is not documented. According to Bosch, one inertial unit can feed stability control as well as the airbag electronics, and an integrated version exists; the 2013 Buick Regal, for example, carries its multi-axis sensor in a module of its own at GM. FCA files a comparable internal failure as C006A-49 on Ram pickups and says that replacing the ABS or occupant restraint module is unnecessary if the code clears after a software update. Whether module B means a second IMU or a sensor in another controller therefore depends on the make.
Possible causes
- Software fault, fixed by an update of the host module medium
- Internal electronic failure of module B medium
- Supply or ground fault at module B low
Symptoms
- ESC, airbag-related or assistance warning depending on host module
- Stability or assistance functions unavailable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0525
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.