C0524
Multi-axis Acceleration Sensor Module B Correlation
Module B's readings disagree with another source for the same motion, most likely module A or values computed from steering angle and wheel speeds. No manufacturer publishes C0524; Audi documents only the A counterpart. A Bosch patent places two sensor devices on opposite sides of the car and treats yaw rate as measured twice, directly and via the centrifugal accelerations at each spot, so a control unit can spot a device giving falsified data. A Hyundai/Kia design moves the yaw and g sensors into the airbag unit and sends them over CAN to the stability controller, a layout where the airbag and brake systems can each hold a set. Which side is wrong is left to further testing.
Possible causes
- Module A or B rotated on its mount after repair or impact medium
- Drifting sensor in one of the two modules medium
- Software or timing fault in the comparing controller medium
Symptoms
- ESC or assistance warning message
- Stability or assistance functions limited
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0524
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.