C0522
Multi-axis Acceleration Sensor Module B Missing Calibration
Module B lacks its stored zero point or installation data, so its readings cannot be trusted. No manufacturer publishes C0522, and which unit carries the letter B is not documented. A Hyundai/Kia design that moves the inertial sensor into the airbag control unit applies offset correction inside the sensor according to the vehicle set-up and keeps data in one-time-programmable memory; Kelsey-Hayes stores assembly and in-car offsets in the controller's non-volatile memory. GM's Saab 9-4x procedure shows the practical rule: a replacement multi-axis module is configured with the programming tool and the yaw sensor learned afterwards. Without that step, functions using module B stay unavailable.
Possible causes
- Module B or its host control unit replaced without configuration high
- Vehicle variant or mounting position coded incorrectly medium
- Calibration data lost after software update low
Symptoms
- Warning message appears directly after a repair
- Assistance or stability functions unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0522
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.