OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0521

Multi-axis Acceleration Sensor Module B Range/Performance

Same fault type as C051C, but for a second inertial module B: its rates or accelerations lie outside what driving physics permits. No manufacturer explains C0521 publicly, and which unit is B on a given car is not documented either. A second unit is common on vehicles with automated driving, where Bosch offers IMUs up to two-fold ASIL-D and stresses redundancy. A GM patent explains what corrupts such readings: six bias terms and three mounting angles, which plant calibration only partly removes and which change over time; GM estimates them from satellite navigation data. Assistance features that rely on module B, and possibly stability control, are suspended while the code is present.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 21

Possible causes

  • Module B loose, tilted or bracket bent after a repair or impact high
  • Bias of the accelerometers or gyros drifted out of tolerance medium
  • Defective sensing element inside module B low

Symptoms

  • Driver assistance or ESC warning message
  • Adaptive cruise or lane functions unavailable
  • Module B reading not zero at standstill (scan tool)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0521

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication